6 July 2018
An internal floating roof tank suffers less evaporation loss and emissions than a comparable external floating roof tank. Emission and losses from roof seals are effectedby wind speed. Since the wind speed above the seals in an internal floating roof is almost zero, the emission of air pollutants is minimized. Either a conventional steel roof or a dome roof will have the same effect on emissions. However, the geodesic dome has an advantage that is not available with a conventional roof. Large steel roofs, on internal floating roof applications, must be supported by columns. These support columns must penetrate the roof. At each penetration there are some emissions. Because the
ATECO finalised design and fabrication of 4 Nos DIA 46.1mt Dome Roof. Subject dome roofs are fabricated for one of our esteemed client from India. Project is located in Kenya and Ateco will supervise the installation of the dome roofs. Ateco is also providing central platform and walkway for the said domes along with gauging platform.
ATECO to deliver 26 each Dome Roofs (Different sizes) to its esteemed client in UAE. Ateco Dome Roofs are going to be installed at Hamriyah Freezone in a brand new terminal. Once Ateco supervises the installation of the Dome Roofs, there will be Full Contact Floating Roofs (Open Deck Type) to be dispatched and installed in same storage tanks. ATECO commits that the supplied goods are being packed for overseas transportation and minimum damage before
ATECO Convert 123 – Units Conversion Software ATECO Convert 123 is our unit conversions calculation software for converting between hundreds of different units of length, area, mass, weight, flow rate, volume, power, pressure, temperature, velocity and more.We promote our web site by offering the Convert 123 software for Free. That’s right, you can download, install it and use it completely free of charge.download
The largest Dome-Roof-Seal Manufacturıng Facility in the World. Ateco, now internationally recognised as the leading manufacturer of storage tank equipment, has recently opened a new manufacturing facility at Kutahya in Turkey. The new 45.000 sq.mt ( 485000 sq.ft ) facility has a manufacturing area of 25,000 sq.mt ( 270.000 sq.ft.) and will be fitted out with the latest numerically controlled bending, laser cutting and welding machines to enable Ateco to manufacture their Ateco Aluminum Dome Roof